Work with Us
We at Velankani, aim to provide you with a career, which is both satisfying and challenging. We believe in an open door policy, and actively encourage new ideas leading to improvement and growth. As a means of providing learning opportunities, we provide technical as well as job related training to all new employees.
Salesforce Senior Developer
Designation: Senior Developer
No. of Openings: 1
(JD Should have brief Description about the project he/ she would be working on, Roles & Responsibilities)
Roles and Responsibilities:
1. Handle Team
2. Work independently based on requirements
3. Sosl, Soql
4. Integration 3rd party
5. Lightning components
Optional Skills but preferable:
Keywords (to be searched in Naukri /Monster):
Sr. Lead-Testing, Smart Metering
Qualification: Diploma/ITI in Electronics OR BE Electronics.
Experience: 6+yrs OR 10+yrs respectively, Hands-On experience in Testing & Validation of Low Tension (LT) & High Tension (HT) Energy Meters (1ph & 3ph Prepaid Meters, Bi-directional Net Meters, Trivector Meters) on related Test & Measurement/Test & Calibration Equipments as Per IS Standards.
Knowledge on IS & IEC standards (as below) is a Must.
- IS13779 & IS14697 latest amendments, IS15884 & IS15959 Part 1&2.
- CBIP-304, 88
- IEC1107 / IEC62056-21
Knowledge of Meter Simulation Tool as per below standards will be an added advantage.
- IEC62052-11, IEC62053-21 & 22
- IEC62056-61&62 (DLMS – COSEM /Blue book)
- IEC62056-53&46 (DLMS – Green book)
Must have worked with NABL Accredited labs in India for DA testing & Type Testing of Energy Meter.
Working knowledge on Master Test Plan for Smart Meters as per BIS & Client’s GTP.
- Metrology testing as per IS13779, Communication testing as per IS15959 & 15884,
- Type test, Routine test & Acceptance test
- Pre-payment meter testing
- Report Generation
- Specification Analysis etc…
Knowledge in setting up of STI 13779:1999 (Scheme of Testing & Inspection) compliance
lab for Bureau of Indian standard Inspection for product certification and BIS Licence renewals.
Engineer – Test & Integration, Smart Metering
Must have the ability to interpret protocol message traces and use them to diagnose problems.
Practical experience of IP networking, including configuration of routers, IP Static servers, etc.(A working knowledge of TCP/IP and networking in general).
Should be familiar with ISM bands as per Wireless Planning Comission (WPC) & RF transmission issues.
Should be familiar with the needs of data management and defect tracking tools for Smart Metering.
Familiarity with signal generators, spectrum analysers, Sniffers & other RF data testers etc.
BCS & webserver, MDAS test tool..
Familiarity to RS232, RS485, MODBUS, Optical & GSM command/instruction set.
Senior Metrology Design Manager
Must be able to undertake design of all metrology related aspects of hardware and software
Must be able to evolve solutions for all type of meter features, meter tamper protections and data storage parameters.
Must be capable of developing advanceed metering solutions like thee prepaid meters using smart card, key board, and network based prepaid solutions.Must be able to develop advanced encryption algorithms and advanced meter data base solutions.
Must be able to develop meteringdata communication protocols on defined by utilities on the meter side.
Must be able to interface the metrology to gsm/gprs modules and write suitable attention commmands for meter to respond to gsm data communications.
Must be able to handle single phase and poly phase meeter designs.
Must be able to design meters meeting all indian and international standards for metering like the is and iec standards.
Must be able to benchmark various metering solution from different meter veendors and take deecisions based on quality/performace/ cost considerations.
MDAS Application Software Developer
Must be a Bachelor / Master of computer application degree holder from a reputed university / Institute.
Must possess at least 5 years of application development experience in various areas like Data base management, Relational data base applications, SQL/ORACLE platform development.
Must have developed & executed at least 2 full projects, starting from Specifications requirement upto software testing.Development experience in various compilers like Java, C++, VB, DHTML, and XML languages is a must.
Development experience in .NET platforms and Android Platforms is required.
Knowledge of Software testing tools is preferred.
Senior Metrology Design Engineer (HARDWARE)
5yr+ experience in Metering Domain.
Must have strong knowledge in designing hardware with all Metrology related aspects for Single phase Smart Meter, Three phase Smart Meter, Prepaid Meters, Polyphase meters.
Should be capable to evolve solutions for all types of Smart meter tamper protections as per IS & IEC standards.Must be capable of developing advanced Metering solutions like the Prepaid meters using Smart Card, Key Board and Network based prepaid solutions .
Must possess knowledge to interface the metrology with external communication modules & establish the data communication over AT Command set for meter to respond.
Must be able to design Smart Meters meeting all Indian &International standards for metering like the IS & IEC.
Must be able to benchmark various metering solution from different meter vendors and take a decision based on quality/performance/cost considerations.
Sr. Design & Development Engineer – Metrology
Must be able to undertake design of all metrology related aspects of hardware & software, for single phase & three phase Smart Meters
Must be able to evolve solutions for all types of meter features, meter tamper protections & data storage parameters.
Must be capable of developing Advanced Metering Solutions like the PrePaid meters using smart card, keyboard & Network based prepaid solutions.
Must be able to develop advanced encryption algorithms & advanced meter data base solutions.Must be able to develop metering data communication protocols on the meter side as defined by the utilities.
Must be able to interface the metrology to the data communication modules (LPRF/GSM/PLCC) and write suitable Attention Commands for meter to respond to the data communications.
Must be able to handle single phase & poly phase meter designs.
Must be able to design meters meeting all Indian & International standards for Smart Metering like IS & IEC standards.
Must be able to benchmark various metering solutions from different meter makers and decide based on quality/performance/cost considerations.
Should be capable of developing protocols at all OSI layers above the MAC layer, in the end device and at the Data Concentrators.
Should be able to design data communication indicators, Data Concentrators with various technologies like the Radio devices, Power Line Carrier Communication and Long Range (LoRa) radio systems.
Must have working knowledge in using the networking tools viz. Line Simulators, Network Simulators & Network Sniffers.Should be capable to develop firmware for all kinds of protocol profiles like the Smart Energy Profile (SEP), Device Language Messaging Specifications (DLMS) protocol, Ethernet Protocol and M-Bus protocol.
Must be capable to develop applications over GSM/GPRS stacks using the AT Commands to achieve complete meter to meter communication between the GSM enabled meters to the MDAS system at the Head End Server.
Must be able to develop products on associated communication technologies like the GPS systems, Time Synchronization system based on GPS time stamp, etc.
Dlms Development Engineer
Atleast 5 years experience in development of DLMS protocol stacks for metering systems.
Experience in interfacing a Three phase Smart Meter to the DLMS application layer.
Knowledge of International and Indian standards (IS & IEC) application to these protocols.
Conversant with ANSIC 12 protocol development stack for the US and North American markets.Expert knowledge in getting these protocols tested and certified as per IEC and IS standards.
Must be experienced in development of DLMS compliant intelligent modems, and Data concentrator units.
Must possess knowledge on development of Base Computer Software UI on DOT NET, and interfacing with the Common Meter Reading Instrument (CMRI) unit.
Hardware Design Engineer
Experience : 1 to 3 year
Job details :
Schematic design, PCB Layout review, BOM, PCBA testing and troubleshooting, Signal Integrity analysis, Power Integrity Analysis, Thermal analysis, Board bring up, Support for Mechanical design, Complete responsibility of product development.
Skills required :
Good academic background(Above 80% in 10th, Above 70% in B.E., Mtech is mandatory)Good knowledge in high speed designs, Power electronics, Analog electronics, Digital electronics and computer communication networking.Knowledge on communication interfaces like I2C, SPI, UART, RS232, RS485 etcVerilog Codingunderstanding of EMI/EMCGood communication and presentation skill.Strong analytical and debug skillsOptional : Experience in using Mentor graphics, ORCAD, allegro, Eagle for Schematic and PCB design, Spice simulation.
Experience : 2 to 3.6 years
We are in the process of setting-up a team of 3 personnel initially in VEPL who shall be involved in the audit, review of various transactions and operations on a daily basis. The job will be on a shift basis. The 1st shift will be 6 am to 3 pm. The 2nd shift will be from 1 pm to 10 pm. We need 2 people in each shift. People who live close to Electronics City will be preferred.
Should be B.Com / M.Com / those who have completed CA articleship
Experience in internal / statutory audit, accounting BPO firms, Chartered Accountant firms are preferred. Otherwise, those who are familiar with accounts is good
Candidates should be familiar with TDS, Service Tax, etc
Candidates who have worked in non accounting BPO’s are NOT to be considered
They should be familiar with Tally accounting system or, other accounting system
Experience : 1 to 2 years
Reporting To: : QC Head
Management Cader: : Lower Management
Education : Diploma Electronics
Trainings: 5S, MSD, ESD, IPC610,
Soft Skills : Communication skill
1. Working experience in PCBA inspection with respect to IPC 610 standard
2. Working experience in outgoing quality inspection.
3. Knowledge and experience in Kaizen & Poka-Yoke projects
4. Knowledge on IPC 610E standards, CAPA/ 8D, QC tools, 5S.
5. Knowledge on ESD and MSD requirements.
6. Working Knowledge of SMT & TH process.
7. Responsible and carry out process auditing to ensure ongoing process compliance and product conformance to customer requirements.
Secondary Responsibilities :
Any other work/activities assigned by reporting manager / department head not mentioned above.
Authorities: Raise Process & Product NCs, Line stoppage, Line Verification
Experience : 1.6 to 3 years and 3+ years,
Education: Diploma/Eng (ECE)
No of positions: 2 Senior and Junior,
Preferable only from Electronic Manufacturing Firm.
- Understanding BOM
- Sourcing vendors for Electronic components,
- Good knowledge on Electronic components to judge the vendor’s,
- Vendor Management
- Cost Negotiation with Vendors,
- Domestic and International Sourcing
Digital HeadEnd QA Engineer
Experience: 3 to 4 Years
Strong in supporting Servers / Applications involved Digital Headend
Hands on experience on IRDs.
Hands on experience on Multiplexers.
Video Delivery Services, QAM , QPSK.
Knowledge on Transmission and RF.
Strong in UNIX / Linux Administration.
Hands on experience in Shell,Perl,Python Scripting.
Experience in debugging Environment / Network Infrastructure.
Excellent analytical communications, documentation & team collaboration skills.Desired Skills (One or more of following skills are a plus):
Experience with Web based Services including Apache.
Experience with STB operations.
JD for Software engineer / Sr. Software engineer (2-5 yrs )
2 to 4 years of experience in the Application (UI) / Middleware/ Drivers development on STB
Proficient in the following languages: C, and C++Development experience on RTOS/Linux platformsWork experience with one of the following chips MStar, ALi, ST, BRCM, Montage, National etcExperience working on graphics engine / UI framework.Development experience in supporting multi language FontsExperience working on JPEG/PNG/BMPHands on experience on RTOSStrong knowledge on DVB standards would be preferredAbility to effectively communicate and interact with cross-functional team
JD for Module Lead / Tech Lead
Experience: 4-6 yrs, 6-8 yrs
Education: BTech/BE /MTech
4 to 6 years of experience in the Application (UI) / Middleware/ Drivers development on STB
Proficient in the following languages: C, and C++
Development experience on RTOS/Linux platforms
Work experience with one of the following chips MStar, ALi, ST, BRCM, Montage, National etc
Experience working on graphics engine / UI framework.
Development experience in supporting multi language Fonts
Experience working on JPEG/PNG/BMP
Hands on experience on RTOS
Strong knowledge on DVB standards would be preferred
Ability to effectively communicate and interact with cross-functional teamIn-depth knowledge in at least one of the following modules is desirable:
Conditional Access Kernel integration (Any one of the following CAS – Latens, Nagravision, Verimatrix, others)
Smart Card integration with STB
CAM module integration with STB
QT + DirectFB application development on embedded platformsRoles and Responsibilities of Tech Lead / Module lead
In addition to the technical capabilities as mentioned above, Tech / Module lead is expected to have the below mentioned qualities:
- Should be able to mentor, guide and handle the team.
- Should be able to take up responsibilities independently.
- Should have good communication skills.
- Quality with on time delivery of agreed deliverables.
- Motivate and encourage team members.
- Flexible enough to work under different environments.
STB Test Engineer
Experience: 2 TO 5 Years,
Position is open in Bangalore and Delhi
Position is open in Bangalore and Delhi
# Candidate should have 2 – 4 years experience in Manual/Automation STB testing.
- Experience of Manual / Automation Testing for Set Top Box.
- Should have knowledge in DVB & IPTV domain.
- Should have knowledge in STLC & SDLC.
- Experience in test cases creation, test case execution.
- Experience in Test plan & test report preparation.
- Should have thorough knowledge on the DTV features in broadcast, connectivity and Audio/Video domain, DVB, MPEG2 TS, IPTV.
- Good Knowledge on middleware features Reminders, EPG, Subtitles, Channel find & interactive features like DLNA, VOD, Media player.
- Test case development and execution, defect tracking, reporting and analysis.
- Understanding of testing methodologies and QA processes.